The process of assessing and determining the fair worth of a piece of property, such as a building, a factory, or other engineering constructions of various sorts, a building, a piece of land, etc., is called building valuation.
Building value is significantly influenced by a building’s location as well. For instance, a building situated in a market district would be more valuable and sturdier than a similar structure situated in a residential region.
Additionally, the value of buildings situated near adequate municipal water, sewage, and electrical systems has soared. In comparison to a building placed on leasehold ground, a building on freehold land yields a greater valuation amount. The demand for a particular structure, which changes periodically, also affects its value. The value of the building increases as demand increases.
The value of a building in civil engineering also hinges on the potential revenue it may provide if rented out. If a building is not rented out, the annual rent equals 6% of the structure’s capital cost.
It fluctuates depending on the current market price both in time and place.
know about: market valuation of land in west bengal
Building Valuation: Purpose
The following are the purposes of the whole building value.
- For both purchasing and selling buildings: When purchasing or selling a building, it is important to understand the worth of the structure. It would be foolish to carry on with the procedure without a reasonable appraisal of the structure. It may result in significant losses.
One spends their hard-earned cash when they purchase a building. Therefore, losing will be upsetting. For this reason, valuing the structure is necessary before selling or purchasing. A professional should perform the building appraisal.
- Taxation: The amount of tax due on a house or other structure is determined by the structure’s value. We are required to pay certain taxes each year. Everything is subject to a certain base rate of taxation. Building value affects all taxes, including health, property, and municipality.
Structures with different monetary worth will likewise be subject to different taxes. The precise amount of property tax or other taxes due is thus calculated using a valuation-based assessment.
- Assessment of the amount of payable rent: You should be aware of whether the monthly rent you must pay is affordable if you live in a rental property. Many tenants pay their rent without realising how much their place of residence is worth, which results in huge losses.
You must also know the value of your building if you intend to rent it out in order to determine the monthly rent that will be needed. The rent should be a set part of the value of the building. Typically, the annual rent is 10% to 6% of the building’s current market value.
- Before obtaining a loan or mortgage, get loan security: The security for a loan that is made based on the value of a building is a mortgage. Banks typically get a mortgage before disbursing a loan. In the event that the debtor is unable to pay, the bank may take the property and recoup the loan balance.
Therefore, it is important to accurately value the property that a borrower intends to use as collateral before granting a loan to them. If the loan is for a building, the sum cannot be greater than the structure’s value.
- Acquisition under compulsion: The government frequently releases a structure or piece of real estate. These acquisitions may have been made for a variety of reasons. Properties are exonerated for managing several projects, building roads, grabbing power, building new train lines, etc. In these situations, the property owner gets compensated.
When purchasing a building, the owner must receive some kind of payment. The cost of the land should be used to determine how much is to be paid for this competition. Therefore, building valuation is required to determine the building’s value in order to make an acquisition.
- Market rate: The value of the property is what can be acquired at any given time on the open market if the property is placed up for sale. Depending on supply and demand, Market Value may fluctuate from time to time.
- Book value: It is the sum indicated in the account book after appropriate depreciation has been taken into account. The initial cost of the property less the amount of depreciation up to the prior year is the Book Value of the property in a given year.
Determination of depreciation
- Salvage value: Salvage value is the estimated value of an old, useless piece of property. The cost of the salvage value of the property is deducted to arrive at the price of the building or asset that will be depreciated. It is, therefore, the resale value.
- Scrap value: Scrap value refers to wreckage or debris. Scrap value is the cost of materials that have been deconstructed. When a structure is demolished at the end of its useful life, the cost of the leftover rods, timbers, bricks, etc., will bring in some cash. This sum is referred to as scrap value.
- Sinking Fund: It’s a method of depreciating an item while earning enough cash to replace it when its useful life is over. The interest value of the property is generated by this money, which is kept in a sinking fund account.
Building valuation: Methods
Depreciation method of valuation
Building valuation is divided into roofs, walls, floors and windows/doors, where accurate cost of each is calculated using the formula
D = P [(100 – rd)/100)]n
where D= deprecated value, r= rate, d= depreciation value and n is building’s age.
Note that this calculated value does not include the land cost, amenities, water, fittings and fixtures. If the building is not maintained well, then accordingly you should calculate.
Rental-based valuation method
In the Rental Method of Valuation, the building’s net revenue is determined by subtracting all expenses from gross rent. The buying price for a year is derived by assuming a reasonable market interest rate.
The capitalised value, or valuation, of the property, is determined by multiplying the net revenue by the year of acquisition. This approach is only utilised when the freight is known or when enquiries are made to estimate the likely rent.
Comparing directly to capital value
This approach of direct comparison with the capital value of a nearby, comparable property is employed when the rental value is unknown.
Using this approach, the property’s value is determined by direct comparison to the capitalised value of nearby properties that are identical to it.
Based on profit valuation
Commercial assets, including hotels, restaurants, stores, offices, malls, movie theatres, and other similar establishments, are suited for this type of assessment.
Its value is determined by its earnings. In these situations, the valuation’s net yearly income—which has been adjusted for all costs and outgoings—is utilised.
By dividing the net revenue by the year of purchase, one may calculate the value of a structure or piece of land. When compared to the real cost of building, the valuation in this scenario may be excessive.
Calculation of valuation of building or property
In this scenario, the structure’s actual construction cost or the cost of owning the building is taken into account when determining the property’s value. In this instance, sufficient depreciation is permitted, and obsolescence points are taken into account.
Cost from the record
Approximation of construction expenses, the bill of quantities and current rates of building materials and labour contribute to determining the cost of construction. Actual costs of the building can be known by increasing or decreasing the percentage to the current day rates of labour and materials.
Cost by detailed measurement
A detailed measurement of the project including the various materials used and their present day cost and finally the labour involved will help calculate cost of building. This can also be done by keeping the old records of the building as a reference and building on it.
Cost by plinth area method
In this method, first calculate the plinth area of the building and then calculate the plinth area of a similar building in the locality. However, note that both buildings should be similar else the result won’t be accurate. For this ensure that the building’s different parts like foundation, structure, roof, walls, door, windows etc. are all calculated thoroughly.
Development of the valuation method
This approach is appropriate for properties that are still developing. This strategy is used, for instance, to split a huge tract of land into plots after making room for roads and other utilities.
When valuing the plots, the acreage needed for amenities, the likely selling price of the plots, and other development costs are taken into account.
The development technique of valuation is often used to value homes or structures that need to undergo renovations, such as new construction or additions.
Based on the expected net revenue the building will earn when renovations are finished, the value is determined.
FAQs
What does land valuation entail?
The process of valuing various assets, including the value of the land and future improvements, is known as land valuation. Because there are no loans, leases, or other contractual obligations in site valuation, it differs from a land valuation.
How is the value of a building different from the value of land?
A land valuation may be defined as the method used to determine the value of the land. Contrarily, the value of a building is determined by the type of structures, their position, the size, shape, and breadth of the roadways, their frontage, the types and quality of the materials used to construct them, and their cost.
| Got any questions or point of view on our article? We would love to hear from you.Write to our Editor-in-Chief Jhumur Ghosh at jhumur.ghosh1@housing.com |