How to fix a noisy ceiling fan?

A ceiling fan is important for air circulation inside the house. However, if the ceiling fan starts to rattle or wobble while in use, it may be irritating. If the problem is not fixed, it may wear out the fan’s motor, rip out electrical connections or loosen the fittings and coverings, among other things. It may lead to the ceiling fan snapping and falling, causing a hazard.

See also: Ceiling fan connection guide

Steps to follow to fix a noisy ceiling fan

Clean the blades

The blade surfaces of a fan gathers dirt and grease. Cleaning the blades is the simplest method for reducing ceiling fan noise.

Apply a moist towel to each blade and gently wipe it down. Likewise, clean the blade mounts. Test the blades after cleaning them to see if the cleaning was successful.

Tighten the blade screws

Every blade of the ceiling fan will be attached to a mount on the assembly. The screws inside the mounts may become looser over time as a result of the blades’ rapid rotation.

Check out these screws. Adjust them as necessary. This technique can frequently cure noisy ceiling fan issues.

Tighten light-fixture fasteners

Ceiling fans today also include light fittings. Combining these functionalities into one appliance makes sense. However, the fixture’s globe or cover could come loose.

Check the fasteners by gaining access to the cover. Use this chance to take the lid off. Check the bulb that is still connected to the fan. In case it’s needed, change the bulb.

Carefully tighten the fasteners while replacing the cover and check if any noise is coming from the fan.

Examine any warped blades

The fan’s blades should all be roughly the same size and direction. A keen eye for ceiling-level warps is necessary for this troubleshooting advice.

To get to the fan’s blades, use a ladder. Blades shouldn’t appear higher or lower than those around them.

Any blades that don’t have a shape like the others should be bent into shape.

Secure the upper canopy

One can see an upper canopy covering the changeover if they closely inspect their ceiling fans. To lessen the noise from the ceiling fan, tighten the canopy.

Reinstall the canopy with screws or tighten the fasteners. To prevent the canopy from loosening often, apply a locking liquid to the screws.

Lubricate the fan motor

Lubrication is a technique used by fan motors to lessen friction while they are operating. But if there is insufficient lubrication, a buzzing sound frequently happens. If a noisy ceiling fan is a problem, access the motor. Check to see if the motor still has any lubricant in it.

Several droplets of oil should be added to a dry motor. You can find directions in the user handbook for the fan.

After effective lubrication, if the buzzing sound persists, the motor might be failing. You can get assistance from an electrician in that case.

Balance the blades

Some ceiling fans are poorly built and have blades made of various materials. The fan wobbles as it rotates because the blades aren’t balanced. To repair a noisy ceiling fan, purchase a balancing kit. They can be purchased in shops and online. If you follow the instructions for adding those weights to each blade, they will balance easily.

Tighten the motor’s cover

The motor of the majority of ceiling fans is situated directly above the rotating blades. The problem appears when the motor cover becomes just a little bit out of place.

Access the fasteners on the motor cover after turning off the fan. Tighten them until the lid can be lifted off of the blades. Turn the fan on low to test it.

FAQs