How to install fencing gate?

Fencing gates have been a popular choice among people as they not only serve a functional purpose but also add an aesthetic touch. Moreover, you can customise these gates according to your preferences, whether modern or traditional. While there are several types of fencing gates, one popular and versatile choice is the chain-link fencing gate, which is better in terms of durability and affordability. Not only this, but these gates are easy to install, too. If you wish to install a fencing gate, check detailed steps to complete this DIY project successfully. 

Source: Pinterest (gardenpassages.com) 

Steps for fencing gate installation

Before starting with the fence installation process, here are a few things that you need to collect: 

• Chain-link fence gate kit
• Measuring tape
• Level
• Post hole digger
• Concrete mix
• Wooden stakes
• Screws and nuts
• Adjustable wrench
• Safety goggles and gloves
• String and stakes (for alignment)

Choose the right location for the gate

Start the installation process by deciding a location for your gate. It should be in the middle of your fence and on level ground. Then, measure the dimensions for your gate opening and make sure it is wide enough to accommodate the gate and easy movement is possible. 

Install gate posts

• Start by digging holes for your gate posts. The hole depth should be around one-third of the total height of the gate. The two holes should be evenly spaced. 
• Now place gate posts into these holes and make sure they are well secured in their place. They should be at a right angle with the ground, and you can secure them with the help of braces if needed.
• To secure them permanently, pour the concrete mix around these posts while making sure it spreads evenly and supports them properly. You can read the manufacturer’s instructions for any extra information. 

Attach the gate hardware

• Read the manufacturer’s instructions and assemble the gate frames, hinges and the gate fabric too. All these come in the gate kit. 
• With the help of strings and stakes, make a line from one gate post to the other to ensure that the gate is hung on the appropriate level. 
• Now, hang the gate while attaching it to the hinges. Make sure it is properly level and adjust if it is not.

Attach gate latches and locks

• First, attach the gate latch to a gate post at a height from the ground. Make sure that it is aligned with respect to the latch catch on the gate frame. 
• You can also add locks for security reasons. Choose a lock according to your needs; however, a padlock is generally preferred over other types.

Some final touches

• Make sure you install gate stops so they do not swing too far and break. 
• You can use a tension wire to straighten your chain link gate if it droops down. Make sure you tighten the wires properly. 

How to maintain a fencing gate?

• Check for damage and other wear and tear and repair instantly. 
• Add a lubricant to ensure smooth movements. Using a lubricant also prevents the gates from rusting. 

FAQs