Step-by-step guide for house framing

House framing is a fundamental aspect of home construction, serving as the structural skeleton that supports the entire building. It plays a crucial role in ensuring that a house can withstand various weather conditions, requires minimal repairs over time and retains its resale value. This guide delves into the essential aspects of house framing, shedding light on the basics and exploring different types of residential framing.

 

House framing: Types

• Platform framing: Platform framing, often referred to as stick framing, is the most prevalent method for residential construction. In this approach, each floor is independently framed on top of the previous one. This technique employs shorter and cost-effective lumber, making the construction process straightforward.
• Balloon framing: Balloon framing involves framing members, or studs, that extend from the foundation to the top of the second story or higher. This technique uses longer and pricier lumber and results in larger wall cavities, potentially increasing the risk of fire. Balloon framing is a more intricate construction method.
• Timber framing and post and beam framing: Timber framing and post and beam framing are traditional building methods that rely on heavy timber. These techniques are less commonly used and are considered antiquated compared to modern framing methods.

 

Materials for house framing

Lumber remains the most popular choice for house framing. Douglas fir, with its robustness, durability and cost-effectiveness, ranks among the top preferences. Pressure-treated lumber is a suitable option for framing exteriors due to its moisture resistance. Lightweight steel framing is gaining popularity, offering durability, uniformity and resistance to fire and moisture. It is worth noting that steel framing comes with a higher price tag and has less favourable insulation properties. Each framing material has its advantages and limitations, making the choice dependent on the specific needs and priorities of the construction project.

 

House framing: How to frame the floor?

Residential framing commences with the floor. But refrain from framing the flooring until the concrete foundation of the house has been adequately set. Here is a step-by-step guide to the process:

• Check your local building codes and secure the necessary permits for your residential framing project.
• Measure the intended floor location and establish layout lines. Ensure that the sill plates are square to maintain structural integrity.
• Secure the sill plates, typically constructed from pressure-treated lumber, to the foundation using anchor bolts. Use water-resistant materials, especially for sill plates in direct contact with concrete.
• Space the floor joists at regular intervals, typically 16 inches apart. This spacing provides adequate support for the flooring structure.
• Attach the rim joists vertically to the sill plates. Rim joists enclose the floor system, contributing to its stability.
• Nail the floor joists perpendicular to the rim joists. Proper attachment ensures that the floor is securely framed and capable of bearing the structure’s weight.
• Cover the floor joists with the subfloor material, commonly composed of 3/4 or 5/8 inch plywood or oriented strand board (OSB). Use wood screws to fasten the subfloor sheets to the joists securely.

 

House framing: How to frame the exterior walls?

The next significant phase in residential framing is the construction and raising of the walls. Here is a comprehensive guide to navigating this stage

 

Exterior wall construction

Exterior walls are assembled as a single piece, framed using 2×4 or 2×6 inch boards. In some cases, long walls may be constructed in sections for ease of handling.

• Measure the precise dimensions of the wall. It would be helpful to draw a chalk outline on the subfloor to aid in proper placement. Reference your house plan to identify the locations of doors and windows.
• Layout the wall’s top and bottom plates, ensuring their alignment.
• Measure and mark the stud locations at 16-inch intervals along the plates.
• Cut and place the studs, attaching the end studs to the plates with framing nails using a nail gun.
• Add doors or windows as per the house plan, securely attaching the necessary framing components.
• Install corner post studs at the wall edges. Every wall should have corner posts.
• Decide whether to attach the plywood or OSB sheathing to the studs before or after raising the wall. While attaching sheathing on the ground is more manageable, it increases the wall’s weight and can make raising it more challenging.

 

Wall raising

• With assistance, raise the wall into its designated position.
• Install temporary support bracing to hold the wall upright. Ensure that bracing remains in place until all the walls are raised.
• Toenail the bottom plate of the wall at each end of the sill plate. Drive nails along the length of the bottom plate to firmly attach the wall to the sill plate.

Follow the same process for all exterior walls before proceeding to the interior walls, ensuring accurate placement and secure attachment.

 

Second top plate

• Add a second top plate to the walls to hold them together.
• Use a nail gun to attach the second plate to the framing members with framing nails.

 

Second floor (if applicable)

If your house design includes a second floor, repeat the steps for installing the floor and raising the walls as needed for the upper level.

 

House framing: How to frame the ceiling?

The final phase in residential framing involves constructing the ceiling and roof, creating a safe and weather-resistant home.

 

Ceiling joists

• Place 2×10 inch ceiling joists horizontally, 16 inches apart, across the top plates of the opposing walls.
• Securely attach the ceiling joists to the top plates, ensuring they are level and aligned.

 

Roof design and rafters

• Calculate the necessary size and placement of the rafters based on your roof design and desired pitch.
• Position the rafters diagonally so that they meet at a ridge board located at the peak of the roof.
• Fasten the rafters in place to create the roof framework.

 

Rafter ties

• Nail horizontal 2×4 or 2×6 inch rafter ties to the rafters and top plates at both ends of the roof structure. These rafter ties prevent the walls from spreading apart, contributing to the structural stability of the building.

 

Exterior sheathing

• Nail the exterior sheathing onto the exterior walls using framing nails.
• Ensure that the sheathing is secure to provide structural integrity and support for the structure.

 

Roof sheathing

• Nail the sheathing to the roof framework, ensuring that it is securely attached to the rafters. Fastening the roof sheathing is essential for creating a stable and weather-resistant roof structure.

 

Fascia boards

• Cap the exposed ends of the roof rafters with 2×6-inch fascia boards.
• Fascia boards provide a finished appearance to the roof’s edge and protect the exposed rafters.

 

House framing: How to frame the doors and windows?

When framing the walls, create rough openings for doors and windows, even if the installation of these components is scheduled for a later stage.

 

Measure and mark rough opening

Begin by measuring and marking rough openings for the door frames.

 

Attach king studs

Secure the door frames’ king studs to the top and bottom plates. These vertical members provide the main support for the door frame.

 

Build the header

• Construct a header by placing a 1/2-inch piece of plywood between two 2×8-inch boards to bear the load above the door.
• Cut the header to the appropriate length and fit it snugly between the king studs.

 

Install cripple stud

Nail a cripple stud vertically between the header and the top plate. This additional support member enhances the structural integrity of the door frame.

 

Secure jack studs

Nail the jack studs into position against the king studs. Jack studs provide lateral support and help distribute the load from the header to the foundation.

 

Finalise door installation

Drive nails through the king studs into the header to firmly secure it in place. Once the house framing is complete, you can cut the sole plate as needed and proceed with the door installation.

Framing a rough opening for a window follows a similar process, utilising specific window frame measurements.

 

FAQs

Where do you start when framing a house?

Initiate your house framing project with the foundation. A sturdy and fully cured foundation is essential for constructing the house frame.

What is the strongest way to frame a house?

The use of Insulated Concrete Form (ICF) wall systems is one of the strongest ways to frame a house. ICF walls provide strength, energy efficiency, durability and resilience against disasters. They involve pouring reinforced concrete into hollow panels made from materials like expanded polystyrene (EPS) and reinforcing bars.

Which frame is best for houses?

Timber frames offer a fast and cost-effective option for house framing, while steel frames provide exceptional strength and potential longevity. When determining the most suitable framing material for your house, consult a trusted local builder or reputable home design consultant.

Which wall to frame first?

Through walls, such as hallway walls and longer walls in primary rooms, are framed first. Subsequently, butt walls, which are shorter partitions, are framed and attached to the corners of the through walls.

What is the strongest part of a house?

The foundation of a house plays a pivotal role in providing stability, strength, resiliency, quality and energy efficiency. Building a strong house commences with a well-constructed foundation.

What are the 3 main parts of a wall frame?

●Top plate: A horizontal support that anchors the wall to the ceiling. ●Bottom plate: A horizontal support that anchors the wall to the floor. ●Vertical stud: These connect the top and bottom plates, forming the frame, and are spaced 16-24 inches apart

What is the standard size of the house frame?

The industry standard for residential construction involves 2x4 or 2x6 wood framing, spaced 16 inches in the centre. This method includes double top plates, three-stud corners, multiple jack studs, double or triple headers and other structural elements.

What is the most common framing method?

Platform framing is the prevailing framing technique in modern residential constructions. In this method, each story is framed atop the previous one, contributing to its widespread use.

What is the RCC frame structure?

RCC stands for Reinforced Concrete Cement. In an RCC-framed structure, the load of the building is transferred from the slabs to the beams, then to the columns and the lower columns and eventually to the foundation.

 

Got any questions or point of view on our article? We would love to hear from you. Write to our Editor-in-Chief Jhumur Ghosh at [email protected]