M Sand: Price, types and advantages for sustainable construction

Owing to rapid urbanisation and large-scale construction activities, the demand for sand has increased tremendously. However, sand scarcity is a problem affecting many countries, including India. With natural sand, which is found in riverbeds and coastal regions, becoming inadequate to meet the huge demand and the environmental impact caused due to sand extraction from natural sources, M sand or manufactured sand has emerged as a sustainable option.

The construction sector in India is now relying on manufactured sand instead of river sand. Many real estate developers across major cities like Delhi, Mumbai, Chennai, Bangalore and Pune have shifted to using M sand, as it is affordable and eco-friendly.

known about sand calculator

M sand meaning

M sand is a form of artificial sand, manufactured by crushing large hard stones, mainly rocks or granite, into fine particles, which is then washed and finely graded. It is widely used as a substitute for river sand for construction purposes, mostly in the production of concrete and mortar mix.

Manufactured sand or M sand is referred to by other names such as crushed sand, crushed stone sand, artificial sand, pozzolan sand, etc.

All about: sand replacement method

M sand price in India

The cost of manufactured sand in a city like Bangalore is mentioned below:

Also read all about GST on building materials and sand GST rate

M sand: Manufacturing process

The manufacturing process for M sand takes place in three stages:

• Firstly, it involves crushing stones of varying sizes into aggregates using vertical shaft impact (VSI) crushers.
• The material is then fed into a Rotopactor for crushing the aggregates into sand to the desired grain size.
• Finally, the process of screening, to remove dust particles and washing of sand for eliminating minute particles, is carried out.

See also: 3D printed house: All you need to know about India’s first 3D-printed home

M sand vs river sand properties

M sand differs significantly in physical and mineralogical properties, as compared to river sand. Here are the main properties of manufactured sand:

• The shape of this artificial sand is cube-like or angular.
• It has a rough texture. Thus, it is preferred for making concrete.
• The water absorption capacity of manufactured sand is 2% to 4%.
• As it is artificially produced, there are no oversized particles.
• There are lesser impurities in crushed sand compared to river sand.
• The bulk density is 1.75 gm per cubic cm.
• The specific gravity of manufactured sand is 2.5 to 2.9, depending on the parent rock.
• Permissible limit of fines below 75 microns is up to 15%.
• The controlled gradation of Zone-II is possible, making it ideal for concrete.

See also: All you need to know about Andhra Pradesh sand booking platform

M sand advantages

High strength of concrete

Manufactured sand possesses the desired properties like shape, smooth texture and consistency and required gradation of fines. These qualities lend greater strength to the concrete structure.

Improved quality of concrete

Due to low impurities such as clay, dust, etc., the sand helps produce better quality concrete. Moreover, the use of manufactured sand reduces construction defects in concrete, such as segregation, bleeding, honeycombing, voids and capillarity.

Durability of concrete

Since the sand is produced using a selected quality of granite, it possesses the right physical and chemical properties for making concrete structures. Due to its unique properties, manufactured sand enables structures to withstand extreme weather conditions and prevents corrosion of reinforcement steel.

Better workability of concrete

Manufactured sand requires a lower water-to-cement ratio, thus, providing workable concrete. It improves the consistency of the concrete, increases the strength and requires less effort for mixing and placement of concrete, therefore, improving productivity.

Economical

Since there are no impurities, there is no wastage. Moreover, the cost of transportation of M sand is 30% to 50% lower than the transportation cost required for river sand.

Eco-friendly

The use of manufactured sand eliminates the need for dredging of riverbeds for extracting river sand, which can have an adverse environmental impact, such as water depletion threat and impact on the safety of dams and bridges.

See also: All about the National Building Code of India guidelines for residential buildings

Other advantages of M sand

• Around 30% increase in masonry strength is achieved using manufactured sand.
• M sand achieves better bond with cement than the round particles of natural sand. This is due to the reason that artificial sand contains sharp edged particles.
• Some studies prove that concrete made using M sand has 6% to 9% higher compressive strength and 12% to 15% higher flexural strength than river sand material of the same grade.
• M sand has good abrasion resistance

See also know about: Density Of Sand

M sand: Disadvantages

• The angular texture or flaky particles obtained from improper crushing may lead to increased water and cement requirements, thus making it unsuitable for concrete production.
• Non-availability of adequate set up for crushers in some parts of the country, such as West Bengal, can be a problem, owing to the higher costs as compared to river sand.
• The requirement of cement is higher as compared to river sand for high-grade pumpable concrete in high-rise structures, which may not be economical.

M sand types

Manufactured sand is classified into the following types:

• M sand for concreting: This type of M sand is used in concrete. The granule thickness or the sieve size is 150 microns – 4.75 mm. It conforms to IS Code 383:1970.
• M sand for plastering: This type of sand finds application in tiling and wall plastering purposes. The granule thickness or sieve size is 150 microns – 2.36 mm. It conforms to IS Code 1542: 1992.
• M sand for brick or block work: This type of sand is mainly used for masonry or brick or block-laying works. The granule thickness or sieve size is 150 microns – 3.55 mm. It conforms to IS Code 2116: 1980.

See also: All about AAC Blocks

Difference between M sand and river sand

M sand latest updates

The Tamil Nadu government is planning to draft a new policy for manufacturing artificial sand and regulate its sales. In January 2021, the state’s Public Works Department submitted the final draft of the M-sand policy to the government. The objective of the proposed policy, would be to promote the use of manufactured sand as an alternative construction material. Once the policy comes into effect, it will be mandatory for manufacturers to obtain approvals for the quality of material being used. It will also help in the regulation of the trade and keep a check on adulteration and violations of norms.

Difference between M Sand and P Sand

P sand, which refers to Plastering Manufactured Sand is crushed sand or manufactured fine aggregate, primarily used for plastering and creating renders. It helps provide a smooth finish to the plasters. P sand is considered better than M sand and find many applications. On the other hand, M sand is utilised for concrete or mortar mix. The size of M sand ranges from 0 to 4.75 mm while the size of P sand ranges from 0 to 2.36 mm.

Revolutionizing construction: M sand solutions

Global aggregates demand is estimated to rise to 60 billion tonnes per annum by 2030 due to rising population and urbanization. Sand is produced mechanically and the raw material for m sand mostly comes from bedrock. The rocks are crushed and grinded into smaller pieces.

With availability of different types of crusher and suitable process design based on the application and the sand to be produced, it can be utilised to turn stones into just the aggregate required.

Sustainable building with M sand technology

Large-scale and illegal ways of extracting natural sand can lead to significant environmental impacts such as erosion in rivers and coastlines, and changes in water’s PH levels. Thus, the use of manufactured sand can play a vital role in ensuring sustainable use of sand.  Moreover, M sand does not contain impurities like silt content, clay particles, organic compounds or other soluble compounds that can affect its strength and durability.

Although the mechanical manufacturing of sand consumes energy but its production can be carried out on-site. Thus, it helps reduce transportation costs and environmental impact.

High quality M sand for stronger structures

Using the latest technologies in the m sand process, one can achieve better grain proportions and control in the m sand gradation with a very good particle shape and less ultra-fines generation. M sand is highly uniform in structure than natural sand. Besides, in concrete production, manufactured sand is less required in concrete mix by about 5 to 20% than natural sand when filling voids volume between the particles. Quality raw materials are essential for high-quality concrete. Thus, high-quality m sand will prove advantageous by enhancing the concrete quality.

Say goodbye to river sand with M sand

For industrial concrete purposes, other types of sand such as desert sand are not suitable. The requirement of sand in concrete is that the grains should adequately angular to allow them to adhere to each other, giving durability to the material. Sea sand are required to be washed first,. Otherwise, the presence of salt will rust the steel bar reinforce supports, making the structure brittle.

FAQs